Decoderwerk 10103 C-Track relay decoder for switching track sections or loads (DCC + Motorola)

• The decoder has 1 output that works as a changer.
• Through the use of relays, potential-free circuits are possible, the consumer is completely separated from the decoder.
• Operation can be done with DCC or Märklin® Motorola.
• 100% quality check of all decoders
  Development and production in Germany
  We only use components of well-known brand manufacturers

Compatible

• Märklin C-Track The decoder can be used and connected to the following tracks, among others.
  • Straight track 24172
  • Straight track 24188
  • Straight track 24229
  • Straight track 24236
  • Straight track 24360
  • Curved track 24912
  • Curved track 24230
  • Curved track 24330
  • Curved track 24430
  • Curved track 24530
• The decoder can be inserted and connected to the following tracks, among other things.
  • Straight track 62172
  • Straight track 62188
  • Straight track 62229
  • Straight track 62236

Voltage

• Build up
  • 9-24V track voltage
  The decoder is supplied directly by the track voltage. No separate power supply can be connected.
• Performance
  • 30V DC voltage
  • 30V AC voltage
  • 2A current
  The relay can be loaded with 2A and is suitable for up to 30V DC or AC voltage.
• Need
  • Quiet current below 5mA
  The decoder itself requires under 5mA in the idle mode. The relay is bistable and requires no current to hold the position after switching.

Coupling

• Artificial intelligence, at least a little. The decoder has an automatic learning mode for addressing. You just have to press a button and call up the desired address at your headquarters. Done.
• Individually The decoder can be assigned an individual address. The address is freely selectable.
• Remote control The decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.
• Inspection The decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.

Configuration

• Memory The relay is bistable and automatically retains the last selected position.
• Forever The output is configured as a changer. The relay remains in the selected position until a new command is sent.
• Small steps You can adjust the switching time individually. Switching times from 1 second to 255 seconds are possible. And that in small steps of a second.

Installation

• Mounting The decoder can be easily attached to the inner bed of C-tracks from Märklin or Trix.
• Connections The decoder has all connection cables for direct installation in a Märklin C-track.