{"title":"Stationary Decoders","description":null,"products":[{"product_id":"esu-51830-switchpilot-3-4x-accessory-decoder-dcc-mm-oled-feedback","title":"ESU 51830 SwitchPilot 3, 4x accessory decoder, DCC\/MM, OLED, Feedback","description":"\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eSwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption.In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eModes\u003c\/h2\u003e\n\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eThe SwitchPilot 3 is multi-protocol and can be used with workstations according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eFunctioning\u003c\/h2\u003e\n\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eThe SwitchPilot 3 can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 8 transistor outputs, which are grouped in the 4 exit pairs 1 to 4. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case:In pulse mode, the output is switched on as soon as a switching command is received. The fact that the output automatically switches off again as soon as the time stored in the decoder has elapsed prevents the burning of magnetic article drives.At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps.In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command \"Ge- rade\/Green\" of the assigned button and stopped again with the command \"Branching\/Red\".Optionally, the output can also be slowly dimmed and dimmed (so-called \"zoom\" for glow lam pen simulation).With the switch 3 mode switch, you can switch all output pairs together to the \"k83\" or \"k84\" modes at lightning speed, regardless of how they are configured.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eFeedback\u003c\/h2\u003e\n\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eSince the SwitchPilot 3 is RailCom®-capable, all settings can be read out and changed directly in the built-in state on request. In combination with an ECoS as an ideal \"partner\", the SwitchPilot 3 can record and display the actual turnout setting with appropriately prepared turnout drives. Finally, you have the certainty that your switch has switched correctly!\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eSet\u003c\/h2\u003e\n\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eThe SwitchPilot 3 can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM (\"Programming on Main\") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The easiest way to set is, of course, with the integrated OLED display and the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. A\"Programming\" with the help of your control panel is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eProtection\u003c\/h2\u003e\n\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eAs with our locomotive decoders, the outputs of the SwitchPilot 3 are largely protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":46595170631960,"sku":"IC-ESU-51830","price":59.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/esu-51830-switchpilot-3-4x-accessory-decoder-dcc-mm-oled-feedback-stationary-decoders-808.jpg?v=1776808309"},{"product_id":"esu-51831-switchpilot-3-plus-8x-accessory-decoder-dcc-mm-oled","title":"ESU 51831 SwitchPilot 3 Plus, 8x accessory decoder, DCC\/MM, OLED","description":"\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eSwitchPilot 3 Plus decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption. In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 Plus has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eModes\u003c\/h2\u003e\n\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eThe SwitchPilot 3 Plus is multi-protocol and can be used with control panels according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eFunctioning\u003c\/h2\u003e\n\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eThe SwitchPilot 3 Plus can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 16 transistor outputs, which are grouped in the 8 exit pairs 1 to 8. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case: In pulse mode, the output is switched on as soon as a switching command is received. Since the output automatically switches off again as soon as a time stored in the decoder has been reached, a burn-through of magnetic articles is prevented. At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps. In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command \"Gerade\/Green\" of the assigned button and stopped again with the command \"Branching\/Red\".Optionally, the output can also be slowly dimmed and dimmed (so-called \"zoom\" for incandescent lamp simulation).\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eSet\u003c\/h2\u003e\n\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eThe SwitchPilot 3 Plus can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM (\"Programming on Main\") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The setting is, of course, the simplest with the integrated OLED displays as well as the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. \"Programming\" with the help of your headquarters is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eProtection\u003c\/h2\u003e\n\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eAs with our locomotive decoders, the outputs of the SwitchPilot 3 Plus are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":46595170664728,"sku":"IC-ESU-51831","price":97.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/esu-51831-switchpilot-3-plus-8x-accessory-decoder-dcc-mm-oled-stationary-decoders-933.jpg?v=1776808313"},{"product_id":"esu-51832-switchpilot-3-servo-8x-servodecoder-dcc-mm-oled-railcom","title":"ESU 51832 SwitchPilot 3 Servo, 8x servodecoder, DCC\/MM, OLED, RailCom","description":"\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eSwitchPilot 3 servo decoders are optimized for stationary use on your system and can control up to eight RC servo drives. In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 Servo has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eModes\u003c\/h2\u003e\n\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eThe SwitchPilot 3 servo is multi-protocol and can be used with workstations according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled central. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eFunctioning\u003c\/h2\u003e\n\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eThe SwitchPilot 3 servo can be supplied directly from the digital system or an external DC or AC voltage source. The SwitchPilot 3 servo has eight outputs for the control of RC servo drives. In doing so, it can control these drives so precisely that, in addition to switching switches, any other slow movement sequences can be controlled. The SwitchPilot 3 servo has a built-in power-on pulse suppression to eliminate or reduce the system-related \"twitching\" of RC servos when applying the supply voltage. Furthermore, the power supply to the servo can be interrupted to prevent a \"hum\" of some inexpensive servos. Each of the eight servos can be operated either in \"digital mode\" or in the \"proportional mode\" introduced for the first time with the SwitchPilot 3 servo: In digital mode, the servo can start two end positions \"A\" and \"B\", depending on the switching position on the control panel. The position of the two end positions as well as the speed at which thethe servo moves in the desired direction, can be individually set on the SwitchPilot 3 servo. The digital mode is perfect for switching switches or signals that should always remain in a fixed position. In proportional mode, the servo can move and stop in any position within the end positions \"A\" and B. The servo only runs as long as the control panel sends a command. If you release the button, the servo stops. In this way, a servo can be stopped in any desired position. The servo speed can be adjusted individually. The proportional mode is ideal for (water) cranes or engine shed gates or any other application, for which intermediate positions are also required. For each servo, in addition to the end positions and the rotational speeds, it can be determined whether it should rock up when reaching the final position. Furthermore, the generation of the servo pulse can be influenced to adapt to the different RC servos on the market or the power supply of each servo can be switched off individually. In this way, cheap so-called so-called Analog servos as well as modern digital servos (with microcontroller) optimally controlled.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eAnalogue Operation\u003c\/h2\u003e\n\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eThe SwitchPilot 3 servo can be used as a special feature without a digital control panel: On request, up to 16 buttons can be connected for direct switching of the servos.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eSet\u003c\/h2\u003e\n\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eThe SwitchPilot 3 servo can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM (\"Programming on Main\") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The setting is, of course, the simplest with the integrated OLED displays as well as the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. \"Programming\" with the help of your headquarters is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eProtection\u003c\/h2\u003e\n\u003cp class=\"bodytext\" data-mce-fragment=\"1\"\u003eAs with our locomotive decoders, the outputs of the SwitchPilot 3 servo are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":46595170730264,"sku":"IC-ESU-51832","price":89.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/esu-51832-switchpilot-3-servo-8x-servodecoder-dcc-mm-oled-railcom-stationary-decoders-637.jpg?v=1776808317"},{"product_id":"dcc-specialties-wabbitfb-the-wabbit-dual-output-stationary-decoder-for-dcc-with-feedback","title":"DCC Specialties WABBITFB \"The Wabbit\" - Dual Output Stationary Decoder for DCC -- With Feedback","description":"","brand":"DCC Specialties","offers":[{"title":"Default Title","offer_id":46643532529944,"sku":"CH-246-WABBITFB","price":47.98,"currency_code":"CAD","in_stock":true}]},{"product_id":"nce-152-button-board-for-use-w-switch8-mk2-switch-machine-decoder-524-151","title":"NCE 152 Button Board -- For Use w\/Switch8-MK2 Switch Machine Decoder #524-151","description":"","brand":"NCE","offers":[{"title":"Default Title","offer_id":46643822428440,"sku":"CH-524-152","price":45.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/nce-152-button-board-for-use-w-switch8-mk2-switch-machine-decoder-524-151-stationary-decoders-787.jpg?v=1776832308"},{"product_id":"digitrax-ds74-ds74-quad-switch-stationary-decoder","title":"Digitrax DS74 DS74 Quad Switch Stationary Decoder","description":"\u003cp\u003eThe Digitrax DS74 Quad Switch Stationary Decoder allows you to install and operate up to four turnouts directly through any DCC system that has turnout control. It's for use with solenoid or slow-motion turnouts. It's configurable for capacitive discharge with balky solenoids and for on\/off control of 8 layout lights. It features plug and play wire connectors and works with compatible LocoNet systems. It features stabilized and adjustable output voltages, option setup switches for configuration and on-layout programming via LocoNet. It includes eight onboard routes, with EZ-Route setup and routes are directly editable using the latest DT602 IPL. This decoder also features eight input lines for switch and detection inputs; field firmware updating via IPL over LocoNet, a DC 2mm jack for reliable power input and optional DCC track inputs for limited feature capabilities.\u003c\/p\u003e","brand":"Digitrax","offers":[{"title":"Default Title","offer_id":46643906412824,"sku":"IC-245-DS74","price":100.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/digitrax-ds74-quad-switch-stationary-decoder-decoders-797.jpg?v=1776834331"},{"product_id":"digitrax-ds78v-ds78v-eight-servo-loconet-stationary-and-accessory-decoder-for-dcc-servo-control","title":"Digitrax DS78V DS78V Eight Servo LocoNet Stationary and Accessory Decoder -- For DCC Servo Control","description":"The Digitrax DS78V Eight Servo LocoNet Stationary and Accessory Decoder can control up to eight 9G servos for two-position slow-motion turnouts. The decoder is also configurable to control eight 3-position semaphore signals. DS78V works with compatible LocoNet systems and features plug and play connections, option setup switches for configuration and on-layout remote programmability via LocoNet. \u003cul\u003e \u003cli\u003e16 System Routes, with EZ-Route setup.\u003c\/li\u003e \u003cli\u003eRoutes remotely editable using DT602 with latest software. \u003c\/li\u003e \u003cli\u003e16 input lines for Switch and Detection inputs. \u003c\/li\u003e \u003cli\u003eOptional 16 direct hardware Route triggers. \u003c\/li\u003e \u003cli\u003eSoftware field update\/IPL over LocoNet. \u003c\/li\u003e \u003cli\u003eDC 2mm 12V jack for reliable power input. \u003c\/li\u003e \u003cli\u003eSupports two DSXC4 input connector boards and cables. \u003c\/li\u003e \u003cli\u003eSupports two BD4N's for block detection reporting. \u003c\/li\u003e \u003cli\u003eSupports 8 DSXCP1 Fascia control and direction indicators. \u003c\/li\u003e \u003cli\u003eSupports DSXCP1 indicating servo in motion. \u003c\/li\u003e \u003cli\u003eOptional DCC track input for limited feature capabilities. \u003c\/li\u003e \u003c\/ul\u003e \u003cbr\u003e \u003cbr\u003e","brand":"Digitrax","offers":[{"title":"Default Title","offer_id":46643906445592,"sku":"IC-245-DS78V","price":108.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/digitrax-ds78v-eight-servo-loconet-stationary-and-accessory-decoder-for-dcc-control-decoders-518.jpg?v=1776834335"},{"product_id":"dcc-specialties-jacksnap-jack-wabbit-accessory-turnout-decoder-for-low-voltage-snap-coil-turnout-motors","title":"DCC Specialties JACKSNAP Jack Wabbit Accessory\/Turnout Decoder -- For Low-Voltage Snap Coil Turnout Motors","description":"","brand":"DCC Specialties","offers":[{"title":"Default Title","offer_id":46643958317336,"sku":"CH-246-JACKSNAP","price":105.98,"currency_code":"CAD","in_stock":true}]},{"product_id":"dcc-specialties-jacktort-jack-wabbit-accessory-turnout-decoder-for-tortoise-turnout-motors","title":"DCC Specialties JACKTORT Jack Wabbit Accessory\/Turnout Decoder -- For Tortoise Turnout Motors","description":"","brand":"DCC Specialties","offers":[{"title":"Default Title","offer_id":46643958350104,"sku":"CH-246-JACKTORT","price":96.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/dcc-specialties-jacktort-jack-wabbit-accessory-turnout-decoder-for-tortoise-motors-stationary-decoders-116.jpg?v=1776835672"},{"product_id":"dcc-specialties-jshvloco-jack-wabbit-accessory-turnout-w-loconet-for-high-voltage-snap-coil-turnout-motors","title":"DCC Specialties JSHVLOCO Jack Wabbit Accessory\/Turnout w\/LocoNet -- For High-Voltage Snap Coil Turnout Motors","description":"","brand":"DCC Specialties","offers":[{"title":"Default Title","offer_id":46643958382872,"sku":"CH-246-JSHVLOCO","price":125.98,"currency_code":"CAD","in_stock":true}]},{"product_id":"nce-163-light-it-pkg-15-universal-lighting-and-signal-decoder","title":"NCE 163 Light-It pkg(15) -- Universal Lighting and Signal Decoder","description":"","brand":"NCE","offers":[{"title":"Default Title","offer_id":46643977126168,"sku":"CH-524-163","price":144.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/nce-163-light-it-pkg-15-universal-lighting-and-signal-decoder-stationary-decoders-379.jpg?v=1776835914"},{"product_id":"nce-161-light-it-pkg-3-universal-lighting-and-signal-decoder","title":"NCE 161 Light-It pkg(3) -- Universal Lighting and Signal Decoder","description":"","brand":"NCE","offers":[{"title":"Default Title","offer_id":46643977191704,"sku":"CH-524-161","price":30.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/nce-161-light-it-pkg-3-universal-lighting-and-signal-decoder-stationary-decoders-802.jpg?v=1776835922"},{"product_id":"nce-153-q-snap-mk2-controls-4-snap-type-solenoid-switch-machines","title":"NCE 153 Q-Snap Mk2 -- Controls 4 Snap-Type Solenoid Switch Machines","description":"","brand":"NCE","offers":[{"title":"Default Title","offer_id":46644051837208,"sku":"CH-524-153","price":102.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/nce-153-q-snap-mk2-controls-4-type-solenoid-switch-machines-stationary-decoders-561.jpg?v=1776838061"},{"product_id":"digitrax-se74-se74-signal-decoder","title":"Digitrax SE74 Signal Decoder","description":"","brand":"Digitrax","offers":[{"title":"Default Title","offer_id":46644089356568,"sku":"IC-245-SE74","price":152.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/digitrax-se74-signal-decoder-stationary-decoders-544.jpg?v=1776839019"},{"product_id":"nce-115-snap-it-switch-machine-dcc-decoder-for-single-twin-coil-type-machine","title":"NCE 115 Snap-It Switch Machine DCC Decoder -- For Single Twin Coil Type Machine","description":"","brand":"NCE","offers":[{"title":"Default Title","offer_id":46644119765272,"sku":"CH-524-115","price":30.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/nce-115-snap-it-switch-machine-dcc-decoder-for-single-twin-coil-type-stationary-decoders-838.jpg?v=1776839418"},{"product_id":"peco-pls135-stationary-dcc-decoder-smartswitch-tm","title":"Peco PLS135 Stationary DCC Decoder - SmartSwitch(TM)","description":"","brand":"Peco","offers":[{"title":"Default Title","offer_id":46644140867864,"sku":"IC-552-PLS135","price":44.95,"currency_code":"CAD","in_stock":true}]},{"product_id":"digitrax-ho-ds51k1-stationary-decoder-for-single-kato-unitrack-turnout-or-similar-device","title":"Digitrax HO DS51K1 Stationary Decoder -- For Single Kato Unitrack Turnout or Similar Device","description":"","brand":"Digitrax","offers":[{"title":"Default Title","offer_id":46644140900632,"sku":"IC-245-DS51K1","price":24.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/digitrax-ho-ds51k1-stationary-decoder-for-single-kato-unitrack-turnout-or-similar-device-decoders-192.jpg?v=1776839648"},{"product_id":"digitrax-ds44-stationary-decoders-basic-quad-for-slow-motion-machines","title":"Digitrax DS44 Stationary Decoders -- Basic Quad for Slow Motion Machines","description":"\u003cp\u003eDesigned to control turnouts and other accessories.\u003c\/p\u003e","brand":"Digitrax","offers":[{"title":"Default Title","offer_id":46644140933400,"sku":"CH-245-DS44","price":54.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/digitrax-ds44-stationary-decoders-basic-quad-for-slow-motion-machines-924.jpg?v=1776839652"},{"product_id":"nce-151-switch8-mk2-switch-machine-decoder","title":"NCE 151 Switch8-MK2 Switch Machine Decoder","description":"","brand":"NCE","offers":[{"title":"Default Title","offer_id":46644163150104,"sku":"IC-524-151","price":108.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/nce-151-switch8-mk2-switch-machine-decoder-stationary-decoders-835.jpg?v=1776839979"},{"product_id":"dcc-specialties-dsphare2-the-hare-plug-play-stationary-dcc-decoder-for-tortoise-switch-machines-version-ii-with-feedback","title":"DCC Specialties DSPHARE2 The Hare Plug \u0026 Play Stationary DCC Decoder for Tortoise Switch Machines -- Version II - With Feedback","description":"","brand":"DCC Specialties","offers":[{"title":"Default Title","offer_id":46644172587288,"sku":"CH-246-DSPHARE2","price":59.98,"currency_code":"CAD","in_stock":false}]},{"product_id":"lgb-55524-turnout-decoder-1-circuit","title":"LGB 55524 Turnout Decoder, 1 Circuit","description":"\u003cp\u003eOperating commands for an LGB solenoid accessory can be transmitted simply through the track with this turnout decoder. The current pickup takes place directly in the track thus avoiding long, complicated wiring. This means that this MTS turnout decoder is ideal for controlling turnouts and signals on open track or on remote locations on your LGB layout. This decoder is designed for use with CS 2, CS 3, and MTS III. It supports the formats DCC, mfx, and MM.\u003c\/p\u003e","brand":"LGB","offers":[{"title":"Default Title","offer_id":47030656434456,"sku":"IC-LGB-55524","price":101.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/lgb-55524-turnout-decoder-1-circuit-stationary-decoders-184.jpg?v=1776848987"},{"product_id":"lgb-55525-mzs-turnout-decoder-4-channel","title":"LGB 55525 MZS Turnout Decoder, 4-Channel","description":"\u003cp\u003eOperating commands for up to four LGB solenoid items can be transmitted easily through the track with this turnout decoder. Current is taken directly from the track thus avoiding long, complicated wiring. This turnout decoder is ideal for controlling turnouts and signals out on an open rail line or on more distant spots on your LGB layout. Features: four command outputs \/ the mode can be set for each output: normal (for turnouts and signals), synchronous blinking (for lights), asynchronous blinking (for lights), on\/off (for lights and accessories) \/ adjustable switching duration for normal, synchronous, and asynchronous. Can be used with the CS2 and CS3 as well as MZS III. The formats DCC, mfx, and MM are supported.\u003c\/p\u003e","brand":"LGB","offers":[{"title":"Default Title","offer_id":47030656467224,"sku":"IC-LGB-55525","price":189.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/lgb-55525-mzs-turnout-decoder-4-channel-stationary-decoders-654.jpg?v=1776848990"},{"product_id":"lgb-55529-interface-connector-adapter","title":"LGB 55529 Interface Connector Adapter","description":"\u003cp\u003eThis interface connector adapter enables you to operate new 27-pin decoders 55029 in earlier MTS locomotives or powered units with the 10-pin interface connector.\u003c\/p\u003e","brand":"LGB","offers":[{"title":"Default Title","offer_id":47030656499992,"sku":"IC-LGB-55529","price":48.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/lgb-55529-interface-connector-adapter-stationary-decoders-849.jpg?v=1776848994"},{"product_id":"digitrax-ds52-dual-stationary-decoder","title":"Digitrax HO DS52 Dual Stationary Decoder","description":"","brand":"Digitrax","offers":[{"title":"Default Title","offer_id":47049738453272,"sku":"IC-245-DS52","price":35.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/digitrax-ho-ds52-dual-stationary-decoder-decoders-740.jpg?v=1779701467"},{"product_id":"bachmann-44950-trackside-turnout-decoder-with-electrical-cabinet-housing","title":"Bachmann HO 44950 Trackside Turnout Decoder - With Electrical Cabinet Housing","description":"\u003cp\u003eThe Bachmann Trackside Turnout Decoder is housed in a realistic trackside electrical bungalow structure. The decoder allows you to operate your E-Z Track remote-control turnouts by simply plugging in one decoder per turnout and controlling them with your DCC system. Advanced modelers can hardwire the decoder to their turnout motors following the manufacturer instructions.\u003c\/p\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":47109602410776,"sku":"IC-160-44950","price":58.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/bachmann-ho-44950-trackside-turnout-decoder-with-electrical-cabinet-housing-stationary-decoders-387.jpg?v=1779667145"},{"product_id":"decoderwerk-00301-universal-stepper-motor-decoder-2-outputs-contact-inputs-dcc-motorola","title":"Decoderwerk 00301 Universal stepper motor decoder, 2 outputs, contact inputs (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has one motor output and 2 light switch outputs.\u003c\/li\u003e\n\u003cli\u003eThe decoder has 2 contact inputs for analog switching and manual triggering\u003c\/li\u003e\n\u003cli\u003eThe decoder can also be operated manually via 2 integrated buttons (e.g. analog)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperation can be done with DCC or Märklin® Motorola.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe drive is slowly converging (adjustable)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder is suitable for controlling all model railway switches of all manufacturers.\u003c\/li\u003e\n\u003cli\u003eThe travel path is adjustable from 0 to 11mm in 1024 steps (0.01mm per step).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive \u003c\/strong\u003eThe drive is the ideal alternative for the electric switch drives and shifts silently, safely and slowly in accordance with the model. The speed and travel distance are easy to adjust so that the drive works universally regardless of a gauge or track system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVoltage\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder is supplied directly by the track voltage. No separate power supply can be connected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e0.5A current\u003c\/li\u003e\n\u003c\/ul\u003e\nThe light outputs can be loaded with 0.5A and deliver 9-24V DC voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 10mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires less than 10mA in the idle state. The power demand of the output depends on the connected article.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eCoupling\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfiguration\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard \u003c\/strong\u003eBy default, the output makes small steps and runs the engine slowly. The time is adjustable.\u003c\/li\u003e\n\u003cli\u003eThe decoder supports the control of the switch lantern and automatically restores the last circuit of the switch lantern when the decoder starts. It has 2 light outputs for this purpose.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe switch output can be inverted. For example, opposite-roging switches with the same address can be switched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can fine-tune the steps that are driven over 1024 steps (far the way to the back) and the turnaround time as well. The set travel is adjustable up to max. 11mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn command \u003c\/strong\u003eYou can operate the engine manually, via another decoder or even analogly through the 2 contact inputs. Also via the integrated buttons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstallation\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003eThe decoder has all connection cables for direct installation.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting \u003c\/strong\u003eThe decoder can be easily glued under the plate and does not generate any waste heat. An adhesive pad is included.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eRailCom is a registered trademark of Lenz Elektronik GmbH\u003c\/p\u003e\n\u003cp\u003eLocoLine is a registered trademark of Modelleisenbahn GmbH\u003c\/p\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692622410008,"sku":"IC-DWERK-00301","price":32.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-00301-universal-stepper-motor-decoder-2-outputs-contact-inputs-dcc-motorola-stationary-decoders-995.jpg?v=1789620943"},{"product_id":"decoderwerk-00401-turntable-decoder-for-2-rail-and-3-rail-systems-with-frog-polarity-relay-universal-individual-track-outlet-addressing-dcc-motorola","title":"Decoderwerk 00401 Turntable decoder for 2-rail and 3-rail systems, with frog polarity relay; universal individual track outlet addressing (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e1 motor output\u003c\/li\u003e\n\u003cli\u003e1 magnetic output\u003c\/li\u003e\n\u003cli\u003e2 switching outputs for light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e1 SUSI connection\u003c\/li\u003e\n\u003cli\u003e3 contacts\u003c\/li\u003e\n\u003cli\u003eRailCom capable\u003c\/li\u003e\n\u003cli\u003eDCCext capable\u003c\/li\u003e\n\u003cli\u003eT-loop module for 2 conductors\u003c\/li\u003e\n\u003cli\u003eLEDs for lighting\u003c\/li\u003e\n\u003cli\u003eOccupant notification unit for the turntable\u003c\/li\u003e\n\u003cli\u003eAccelerate\/brake ramp function\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eThe power supply of the consumers is provided by the power source connected to the decoder.\u003c\/li\u003e\n\u003cli\u003eThe operation can be done with DCC or Märklin Motorola as well as analog via contacts\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility \u003c\/strong\u003eThe decoder can be inserted and connected directly with the following turntables.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003ePOLA G turntable\u003c\/li\u003e\n\u003cli\u003eMärklin metal turntable (all types)\u003c\/li\u003e\n\u003cli\u003eMärklin turntable (all types)\u003c\/li\u003e\n\u003cli\u003eFleischmann turntable (all types)\u003c\/li\u003e\n\u003cli\u003eRoco turntable (all types)\u003c\/li\u003e\n\u003cli\u003eAll other turntables with DC motor and 3 connection lines (magnet\/motor)\u003c\/li\u003e\n\u003cli\u003eAll other turntables with DC motor and switching contact per output\u003c\/li\u003e\n\u003cli\u003eSelf-maded turntables with switching contact per output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e9-18V AC voltage\u003c\/li\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder is supplied directly by the track voltage. No separate power supply can be connected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e0.1A per output\u003c\/li\u003e\n\u003cli\u003e2A engine output\u003c\/li\u003e\n\u003c\/ul\u003e\nEach output can be loaded with 0.1A and delivers 9-24V DC voltage. The decoder can be loaded with a maximum of 3A in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 10mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires less than 10mA in the idle state. The power requirement of the outputs depends on the connected article. We recommend a power supply with 1A.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong conclusion \u003c\/strong\u003eThe decoders have a charging control, so that the control panel does not mistakenly diagnose a short circuit when starting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eEach exit can be assigned an individual address. The addresses are freely selectable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSocial \u003c\/strong\u003eAn address can be assigned several times. When the address is called, all outputs associated with this address are switched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory \u003c\/strong\u003eThe decoder automatically restores the last circuit at startup and saves its position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope \u003c\/strong\u003eEach track exit can be assigned its own address for direct control. In addition, addresses for 180° and step-by-step control are available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Always \u003c\/strong\u003eEach output is configured as continuous operation. The selected output is switched until it is deactivated by selecting it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching time individually. Switching pulses of 1 to 255 seconds are possible in small steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003ePhoenix Contact brand terminals for cables up to 1mm2.\u003c\/li\u003e\n\u003cli\u003eThe control signal DCC is connected via optocouplers and thus completely galvanically separated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u003c\/strong\u003e100x97mm, 25mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastening \u003c\/strong\u003e2 mounting holes of size M3. The inner diameter is 3.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe recommend our sound module 70101 with matching turntable sound!\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692622704920,"sku":"IC-DWERK-00401","price":112.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-00401-turntable-decoder-for-2-rail-and-3-systems-with-frog-polarity-relay-universal-individual-track-outlet-addressing-dcc-motorola-stationary-440.jpg?v=1789620966"},{"product_id":"decoderwerk-00801-8-channel-feedback-module-2-rail-3-rail-ground-contact-switching-rs-loconet-s88-loconet-s88-rs-bus","title":"Decoderwerk 00801 8-channel feedback module (2-rail \u0026 3-rail), ground-contact switching (RS\/LocoNet\/S88) (LocoNet + S88 + RS-BUS)","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe feedback module has 8 feedback entries.\u003c\/li\u003e\n\u003cli\u003eThe operation can be done with DCC or Märklin Motorola.\u003c\/li\u003e\n\u003cli\u003eThe operation works for 2 and 3 conductor systems\u003c\/li\u003e\n\u003cli\u003eFeedback can be done via S88, LocoNet and RS-Bus\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatible\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTo all centrals which support RS-Bus, LocoNet or S88 as feedback bus.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nThe supply must always be via the track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e20mA current\u003c\/li\u003e\n\u003c\/ul\u003e\nEach signal output can be loaded with 3A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 20mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires under 20mA in the sleep state. The power demand of the output depends on the connected article.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You just have to press a button and call up the desired address at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n\u003cspan\u003eInstallation\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003ebrand clamps up to 1mm2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurntable \u003c\/strong\u003eThe control signal DCC or Märklin Motorola is connected via optocouplers and thus completely galvanically separated. All signal outputs are also connected via optocouplers so that all bus systems to the control control unit are completely galvanically separated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u003c\/strong\u003e95x80mm, 40mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastening \u003c\/strong\u003e2 mounting holes of size M4. In the stable housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692622672152,"sku":"IC-DWERK-00801","price":56.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-00801-8-channel-feedback-module-2-rail-3-ground-contact-switching-rs-loconet-s88-bus-stationary-decoders-319.jpg?v=1789620983"},{"product_id":"decoderwerk-00802-8-channel-occupancy-detector-2-rail-3-rail-3a-per-channel-rs-loconet-s88-loconet-s88-rs-bus","title":"Decoderwerk 00802 8-channel occupancy detector (2-rail \u0026 3-rail), 3A per channel (RS\/LocoNet\/S88) (LocoNet + S88 + RS-BUS)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe feedback module has 8 notification inputs with integrated document identification.\u003c\/li\u003e\n\u003cli\u003eThe operation can be done with DCC or Märklin Motorola.\u003c\/li\u003e\n\u003cli\u003eThe operation works for 2 and 3 conductor systems\u003c\/li\u003e\n\u003cli\u003eFeedback can be done via S88, LocoNet and RS-Bus\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatible\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTo all centrals which support RS-Bus, LocoNet or S88 as feedback bus.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nThe supply must always be via the track\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e20mA current\u003c\/li\u003e\n\u003c\/ul\u003e\nEach signal output can be loaded with 3A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 20mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires under 20mA in the sleep state. The power demand of the output depends on the connected article.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You just have to press a button and call up the desired address at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n\u003cspan\u003eInstallation\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003ebrand clamps up to 1mm2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurntable \u003c\/strong\u003eThe control signal DCC or Märklin Motorola is connected via optocouplers and thus completely galvanically separated. All signal outputs are also connected via optocouplers so that all bus systems to the control control unit are completely galvanically separated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u003c\/strong\u003e95x80mm, 40mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastening \u003c\/strong\u003e2 mounting holes of size M4. In the stable housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692622999832,"sku":"IC-DWERK-00802","price":64.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-00802-8-channel-occupancy-detector-2-rail-3-3a-per-rs-loconet-s88-bus-stationary-decoders-537.jpg?v=1789620993"},{"product_id":"decoderwerk-10102-1-channel-relay-decoder-with-bistable-relay-for-switching-various-loads-dcc-motorola","title":"Decoderwerk 10102 1-channel relay decoder with bistable relay for switching various loads (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 1 output that works as a changer.\u003c\/li\u003e\n\u003cli\u003eThrough the use of relays, potential-free circuits are possible, the consumer is completely separated from the decoder.\u003c\/li\u003e\n\u003cli\u003eOperation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBUILD UP\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V TRACK VOLTAGE\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder is supplied directly by the track voltage. No separate power supply can be connected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePERFORMANCE\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e30V DC VOLTAGE\u003c\/li\u003e\n\u003cli\u003e30V AC VOLTAGE\u003c\/li\u003e\n\u003cli\u003e2A ELECTRICITY\u003c\/li\u003e\n\u003c\/ul\u003e\nThe relay can be loaded with 2A and is suitable for up to 30V DC or AC voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEED\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQUIET CURRENT BELOW 5MA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder requires below 5mA in the idle state. The relay is bistable and requires no current to maintain the position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTO COUPLE\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eARTIFICIAL INTELLIGENCE, \u003c\/strong\u003eat least a little. The decoder has an automatic learning mode for addressing. You just have to press a button and call up the desired address at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eThe decoder can be assigned an individual address. The address is freely selectable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eREMOTE CONTROL \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control unit by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINSPECTION \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCONFIGURATION\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBy default, the output is set to continuous operation.\u003c\/li\u003e\n\u003cli\u003eThe relay is bistable and automatically retains the last selected position.\u003c\/li\u003e\n\u003cli\u003eYou can adjust the switching time individually. Switching times from 1 second to 255 seconds are possible. And that in small steps of a second.\u003c\/li\u003e\n\u003cli\u003eThe output can be configured as continuous operation. The relay is switched until it is deactivated by selection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eINSTALLATION\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCONNECTIONS \u003c\/strong\u003eBranded terminals from Phoenix Contact for cables up to 1mm2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIMENSIONS \u003c\/strong\u003e25x50mm, 20mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eATTACHMENT \u003c\/strong\u003e2 mounting holes of size M3. The inner diameter is 3.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692623065368,"sku":"IC-DWERK-10102","price":24.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-10102-1-channel-relay-decoder-with-bistable-for-switching-various-loads-dcc-motorola-stationary-decoders-673.jpg?v=1789621002"},{"product_id":"decoderwerk-10103-c-track-relay-decoder-for-switching-track-sections-or-loads-dcc-motorola","title":"Decoderwerk 10103 C-Track relay decoder for switching track sections or loads (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 1 output that works as a changer.\u003c\/li\u003e\n\u003cli\u003eThrough the use of relays, potential-free circuits are possible, the consumer is completely separated from the decoder.\u003c\/li\u003e\n\u003cli\u003eOperation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatible\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMärklin C-Track \u003c\/strong\u003eThe decoder can be used and connected to the following tracks, among others.\n\u003cul\u003e\n\u003cli\u003eStraight track 24172\u003c\/li\u003e\n\u003cli\u003eStraight track 24188\u003c\/li\u003e\n\u003cli\u003eStraight track 24229\u003c\/li\u003e\n\u003cli\u003eStraight track 24236\u003c\/li\u003e\n\u003cli\u003eStraight track 24360\u003c\/li\u003e\n\u003cli\u003eCurved track 24912\u003c\/li\u003e\n\u003cli\u003eCurved track 24230\u003c\/li\u003e\n\u003cli\u003eCurved track 24330\u003c\/li\u003e\n\u003cli\u003eCurved track 24430\u003c\/li\u003e\n\u003cli\u003eCurved track 24530\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe decoder can be inserted and connected to the following tracks, among other things.\n\u003cul\u003e\n\u003cli\u003eStraight track 62172\u003c\/li\u003e\n\u003cli\u003eStraight track 62188\u003c\/li\u003e\n\u003cli\u003eStraight track 62229\u003c\/li\u003e\n\u003cli\u003eStraight track 62236\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder is supplied directly by the track voltage. No separate power supply can be connected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e30V DC voltage\u003c\/li\u003e\n\u003cli\u003e30V AC voltage\u003c\/li\u003e\n\u003cli\u003e2A current\u003c\/li\u003e\n\u003c\/ul\u003e\nThe relay can be loaded with 2A and is suitable for up to 30V DC or AC voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 5mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires under 5mA in the idle mode. The relay is bistable and requires no current to hold the position after switching.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You just have to press a button and call up the desired address at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividually \u003c\/strong\u003eThe decoder can be assigned an individual address. The address is freely selectable.\u003c\/li\u003e\n\u003cli\u003eRemote control The decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory \u003c\/strong\u003eThe relay is bistable and automatically retains the last selected position.\u003c\/li\u003e\n\u003cli\u003eForever The output is configured as a changer. The relay remains in the selected position until a new command is sent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching time individually. Switching times from 1 second to 255 seconds are possible. And that in small steps of a second.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting \u003c\/strong\u003eThe decoder can be easily attached to the inner bed of C-tracks from Märklin or Trix.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003eThe decoder has all connection cables for direct installation in a Märklin C-track.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692622967064,"sku":"IC-DWERK-10103","price":24.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-10103-c-track-relay-decoder-for-switching-sections-or-loads-dcc-motorola-stationary-decoders-363.jpg?v=1789621015"},{"product_id":"decoderwerk-10403-4-channel-relay-decoder-for-switching-various-loads-using-4-changeover-relays-dcc-motorola","title":"Decoderwerk 10403 4-channel relay decoder for switching various loads using 4 changeover relays (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 4 outputs that work as a changer.\u003c\/li\u003e\n\u003cli\u003eThrough the use of relays, potential-free circuits are possible, the consumer is completely separated from the decoder.\u003c\/li\u003e\n\u003cli\u003eOperation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e12-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e9-18V AC voltage\u003c\/li\u003e\n\u003cli\u003e12-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nCost-effective plug-ing power supplies can be used. The decoder can also be supplied directly by the track voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e30V DC voltage\u003c\/li\u003e\n\u003cli\u003e30V AC voltage\u003c\/li\u003e\n\u003cli\u003e3A per relay\u003c\/li\u003e\n\u003c\/ul\u003e\nEach relay can be loaded with 3A and is suitable for up to 30V DC or AC voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 10mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires less than 10mA in the idle state. When all relays are switched, the current requirement is about 80mA. We recommend a power supply with at least 100mA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eEach exit can be assigned an individual address. The addresses are freely selectable.\u003c\/li\u003e\n\u003cli\u003eSocial An address can be assigned several times. When the address is called, all outputs associated with this address are switched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Always \u003c\/strong\u003eAny output can be configured as continuous operation. The selected relay is switched until it is deactivated by selecting it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory \u003c\/strong\u003eThe decoder automatically restores the last circuit of the relay at startup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching time individually. Switching times from 1 second to 255 seconds are possible. And that in small steps of a second.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eThe switching times can be configured individually for each output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003ePhoenix Contact brand terminals for cables up to 1mm2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurntable \u003c\/strong\u003eThe control signal DCC or Märklin Motorola is connected via optocouplers and thus completely galvanically separated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u003c\/strong\u003e90x70mm, 25mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastening \u003c\/strong\u003e4 mounting holes of size M3. The inner diameter is 3.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692623032600,"sku":"IC-DWERK-10403","price":48.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-10403-4-channel-relay-decoder-for-switching-various-loads-using-changeover-relays-dcc-motorola-stationary-decoders-570.jpg?v=1789621029"},{"product_id":"decoderwerk-10803-8-channel-relay-decoder-for-switching-various-loads-using-8-changeover-relays-dcc-motorola","title":"Decoderwerk 10803 8-channel relay decoder for switching various loads using 8 changeover relays (DCC + Motorola)","description":"\u003cdiv class=\"product-addition\"\u003e\n\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 1 output.\u003c\/li\u003e\n\u003cli\u003eOperation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003eThe decoder is suitable for switching Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eand Trix\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eC-track decoupling tracks.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatible\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder can be connected to the following decoupling tracks, among others.\n\u003cul\u003e\n\u003cli\u003eMärklin decoupling track 24997\u003c\/li\u003e\n\u003cli\u003eMärklin decoupling track straight 2297\u003c\/li\u003e\n\u003cli\u003eMärklin Start up - Decoupling track 20997\u003c\/li\u003e\n\u003cli\u003eTrix decoupling track 62997\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMärklin C-track \u003c\/strong\u003eThe decoder can be inserted into the following tracks and connected.\n\u003cul\u003e\n\u003cli\u003eStraight track 24172\u003c\/li\u003e\n\u003cli\u003eStraight track 24188\u003c\/li\u003e\n\u003cli\u003eStraight track 24229\u003c\/li\u003e\n\u003cli\u003eStraight track 24236\u003c\/li\u003e\n\u003cli\u003eStraight track 24360\u003c\/li\u003e\n\u003cli\u003eCurved track 24912\u003c\/li\u003e\n\u003cli\u003eCurved track 24230\u003c\/li\u003e\n\u003cli\u003eCurved track 24330\u003c\/li\u003e\n\u003cli\u003eCurved track 24430\u003c\/li\u003e\n\u003cli\u003eCurved track 24530\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrix C-track \u003c\/strong\u003eThe decoder can be inserted and connected to the following tracks.\n\u003cul\u003e\n\u003cli\u003eStraight track 62172\u003c\/li\u003e\n\u003cli\u003eStraight track 62188\u003c\/li\u003e\n\u003cli\u003eStraight track 62229\u003c\/li\u003e\n\u003cli\u003eStraight track 62236\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder is supplied directly by the track voltage. No separate power supply can be connected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e2A current\u003c\/li\u003e\n\u003c\/ul\u003e\nThe output can be loaded with 2A and delivers 9-24V DC voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 5mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires under 5mA in the idle mode. The power demand of the output depends on the connected article.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard \u003c\/strong\u003eUpon delivery, the switching time is set to 1 second. The decoupling track remains activated as long as the button on the control unit is operated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching pulse individually. Switching pulses of 1 to 255 seconds are possible. And that in small steps of 1 second.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForever \u003c\/strong\u003eThe output can be configured as continuous operation. The output is switched until it is deactivated by selecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory \u003c\/strong\u003eThe decoder optionally restores the last circuit of the output at startup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003eThe decoder has all connection cables for direct installation in a Märklin C-track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting \u003c\/strong\u003eThe decoder can be easily attached to the inner bed of C-tracks from Märklin or Trix.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-addition-expander\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692623327512,"sku":"IC-DWERK-10803","price":64.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-10803-8-channel-relay-decoder-for-switching-various-loads-using-changeover-relays-dcc-motorola-stationary-decoders-489.jpg?v=1789621044"},{"product_id":"decoderwerk-20102-c-track-switching-decoder-for-marklin-and-trix-c-track-uncoupling-tracks-dcc-motorola","title":"Decoderwerk 20102 C-Track switching decoder for Märklin and Trix C-Track uncoupling tracks (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 1 output.\u003c\/li\u003e\n\u003cli\u003eOperation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003eThe decoder is suitable for switching Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eand Trix\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eC-track decoupling tracks.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatible\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder can be connected to the following decoupling tracks, among others.\n\u003cul\u003e\n\u003cli\u003eMärklin decoupling track 24997\u003c\/li\u003e\n\u003cli\u003eMärklin decoupling track straight 2297\u003c\/li\u003e\n\u003cli\u003eMärklin Start up - Decoupling track 20997\u003c\/li\u003e\n\u003cli\u003eTrix decoupling track 62997\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMärklin C-track \u003c\/strong\u003eThe decoder can be inserted into the following tracks and connected.\n\u003cul\u003e\n\u003cli\u003eStraight track 24172\u003c\/li\u003e\n\u003cli\u003eStraight track 24188\u003c\/li\u003e\n\u003cli\u003eStraight track 24229\u003c\/li\u003e\n\u003cli\u003eStraight track 24236\u003c\/li\u003e\n\u003cli\u003eStraight track 24360\u003c\/li\u003e\n\u003cli\u003eCurved track 24912\u003c\/li\u003e\n\u003cli\u003eCurved track 24230\u003c\/li\u003e\n\u003cli\u003eCurved track 24330\u003c\/li\u003e\n\u003cli\u003eCurved track 24430\u003c\/li\u003e\n\u003cli\u003eCurved track 24530\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrix C-track \u003c\/strong\u003eThe decoder can be inserted and connected to the following tracks.\n\u003cul\u003e\n\u003cli\u003eStraight track 62172\u003c\/li\u003e\n\u003cli\u003eStraight track 62188\u003c\/li\u003e\n\u003cli\u003eStraight track 62229\u003c\/li\u003e\n\u003cli\u003eStraight track 62236\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder is supplied directly by the track voltage. No separate power supply can be connected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e2A current\u003c\/li\u003e\n\u003c\/ul\u003e\nThe output can be loaded with 2A and delivers 9-24V DC voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 5mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires under 5mA in the idle mode. The power demand of the output depends on the connected article.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard \u003c\/strong\u003eUpon delivery, the switching time is set to 1 second. The decoupling track remains activated as long as the button on the control unit is operated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching pulse individually. Switching pulses of 1 to 255 seconds are possible. And that in small steps of 1 second.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForever \u003c\/strong\u003eThe output can be configured as continuous operation. The output is switched until it is deactivated by selecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory \u003c\/strong\u003eThe decoder optionally restores the last circuit of the output at startup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003eThe decoder has all connection cables for direct installation in a Märklin C-track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting \u003c\/strong\u003eThe decoder can be easily attached to the inner bed of C-tracks from Märklin or Trix.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692623261976,"sku":"IC-DWERK-20102","price":24.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-20102-c-track-switching-decoder-for-maerklin-and-trix-uncoupling-tracks-dcc-motorola-stationary-decoders-209.jpg?v=1789621056"},{"product_id":"decoderwerk-20101-switching-decoder-for-roco-geoline-uncoupling-track-dcc-motorola","title":"Decoderwerk 20101 Switching decoder for Roco geoLine uncoupling track (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 1 output.\u003c\/li\u003e\n\u003cli\u003eOperation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003eThe decoder is suitable for switching Roco geoLine\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003edecoupling tracks.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatible\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecoder \u003c\/strong\u003eThe decoder is the ideal alternative for the built-in digital decoder 61197.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrives \u003c\/strong\u003eThe decoder can be connected directly to the electric decoupling track 61118.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder is supplied directly by the track voltage. No separate power supply can be connected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e2A current\u003c\/li\u003e\n\u003c\/ul\u003e\nThe output can be loaded with 2A and delivers 9-24V DC voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 5mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires under 5mA in the idle mode. The power demand of the output depends on the connected article.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard \u003c\/strong\u003eUpon delivery, the switching time is set to 1 second. The decoupling track remains activated as long as the button on the control unit is operated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching pulse individually. Switching pulses of 1 to 255 seconds are possible. And that in small steps of 1 second.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForever \u003c\/strong\u003eThe output can be configured as continuous operation. The output is switched until it is deactivated by selecting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory \u003c\/strong\u003eThe decoder optionally restores the last circuit of the output at startup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003eThe decoder has all connection cables for direct installation in Roco geoLine decoupling tracks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting \u003c\/strong\u003eThe decoder can be easily attached to the inner bed of a Roco geoLine track.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003egeoLine is a registered trademark of Modelleisenbahn GmbH\u003c\/p\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692623294744,"sku":"IC-DWERK-20101","price":32.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-20101-switching-decoder-for-roco-geoline-uncoupling-track-dcc-motorola-stationary-decoders-519.jpg?v=1789621068"},{"product_id":"decoderwerk-20601-6-channel-switching-decoder-with-multiple-effects-per-channel-e-g-neon-simulation-time-delays-etc-dcc-motorola","title":"Decoderwerk 20601 6-channel switching decoder with multiple effects per channel (e.g., neon simulation, time delays, etc.) (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 6 outputs.\u003c\/li\u003e\n\u003cli\u003eThe power supply of the consumers is provided by the power source connected to the decoder.\u003c\/li\u003e\n\u003cli\u003eOperation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e7-24V DC voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder is supplied directly by the track voltage. No separate power supply can be connected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e0.5A per output, max. 1A over all outputs\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\nEach output can be loaded with 0.5A and delivers 7-24V DC voltage. The decoder can be loaded with a maximum of 1A in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 10mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires less than 10mA in the idle state. The power requirement of the outputs depends on the connected article. We recommend a power supply with 1A.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong conclusion \u003c\/strong\u003eThe decoders have a charging control, so that the control panel does not mistakenly diagnose a short circuit when starting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. All you have to do is press a switch and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eEach exit can be assigned an individual address. The addresses are freely selectable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSocial \u003c\/strong\u003eAn address can be assigned several times. When the address is called, all outputs associated with this address are switched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory \u003c\/strong\u003eThe decoder automatically restores the last circuit when starting.\u003c\/li\u003e\n\u003cli\u003eAt each of the 6 outputs, div. Effects and processes up to running lights can be adjusted and thus atmospherically illuminated systems, train stations or fairgrounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Always \u003c\/strong\u003eEach output is configured as continuous operation. The selected output is switched until it is deactivated by selecting it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching time individually. Switching pulses of 1 to 255 seconds are possible. And that in small steps of 1 second.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003ePhoenix Contact brand terminals for cables up to 1mm2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u003c\/strong\u003e25x27mm, 15mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastening \u003c\/strong\u003e4 mounting holes of size M3. The inner diameter is 3.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692623360280,"sku":"IC-DWERK-20601","price":32.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-20601-6-channel-switching-decoder-with-multiple-effects-per-e-g-neon-simulation-time-delays-etc-dcc-motorola-stationary-decoders-856.jpg?v=1789621083"},{"product_id":"decoderwerk-30104-turnout-decoder-for-roco-geoline-drives-dcc-motorola","title":"Decoderwerk 30104 Turnout decoder for Roco geoLine drives (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 1 output.\u003c\/li\u003e\n\u003cli\u003eMotorola The operation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003eThe decoder is suitable for controlling Roco geoLine\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eswitches.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatible\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecoder \u003c\/strong\u003eThe decoder is the ideal alternative for the built-in digital decoder 61196.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrives \u003c\/strong\u003eThe decoder can be connected directly to the electric switch drive 61195.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoco geoLine\u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eswitches \u003c\/strong\u003eThe decoder can be inserted and connected directly into the following switches.\n\u003cul\u003e\n\u003cli\u003eSwitch left 61140\u003c\/li\u003e\n\u003cli\u003eSwitch right 61141\u003c\/li\u003e\n\u003cli\u003eBow switch left 61154\u003c\/li\u003e\n\u003cli\u003eRight turner 61155\u003c\/li\u003e\n\u003cli\u003eThree-way switch 61160\u003c\/li\u003e\n\u003cli\u003eDouble crossover switch 61164\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder is supplied directly by the track voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e2A current\u003c\/li\u003e\n\u003c\/ul\u003e\nThe outputs can be loaded with 2A and provide 9-24V DC voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 5mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires under 5mA in the idle mode. The power demand of the output depends on the connected article.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard \u003c\/strong\u003eBy default, the output makes small steps with a switching pulse of 400ms.\u003c\/li\u003e\n\u003cli\u003eThe switch output can be inverted. For example, opposite-roging switches with the same address can be switched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching pulse individually. Switching pulses from 10 ms to 2,550 ms are possible. And that in small steps of 10ms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003eThe decoder has all connections for direct installation in a Roco geoLine sever.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting \u003c\/strong\u003eThe decoder can be easily attached to the inner bed of a Roco geoLine switch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692623622424,"sku":"IC-DWERK-30104","price":24.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-30104-turnout-decoder-for-roco-geoline-drives-dcc-motorola-stationary-decoders-399.jpg?v=1789621089"},{"product_id":"decoderwerk-30103-1-channel-turnout-decoder-suitable-for-all-solenoid-operated-drives-dcc-motorola","title":"Decoderwerk 30103 1-channel turnout decoder suitable for all solenoid-operated drives (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 1 output.\u003c\/li\u003e\n\u003cli\u003eDCC \u0026amp; Märklin Motorola Operation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003eThe decoder is suitable for single-set switches with double spool drive or two decoupling tracks.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder is supplied directly by the track voltage. No separate power supply can be connected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e2A current\u003c\/li\u003e\n\u003c\/ul\u003e\nThe output can be loaded with 2A and delivers 9-24V DC voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 5mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires under 5mA in the idle mode. The power demand of the output depends on the connected article.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong conclusion \u003c\/strong\u003eThe decoders have a charging control, so that the control panel does not mistakenly diagnose a short circuit when starting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You just have to press a button and call up the desired address at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard \u003c\/strong\u003eBy default, each output generates a switching pulse of 400 ms.\u003c\/li\u003e\n\u003cli\u003eSmall steps You can adjust the switching pulse individually. Switching pulses from 10 ms to 2,550 ms are possible. And that in small steps of 10ms.\u003c\/li\u003e\n\u003cli\u003eIf the switching time is increased, the output remains activated as long as the button on the control panel is pressed. Thus, for example, decoupling tracks can be precisely controlled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForever \u003c\/strong\u003eThe output can be configured as continuous operation. The output is switched until it is deactivated by selecting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003ePhoenix Contact brand terminals for cables up to 1mm2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u003c\/strong\u003e25x50mm, 20mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastening \u003c\/strong\u003e2 mounting holes of size M3. The inner diameter is 3.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692623687960,"sku":"IC-DWERK-30103","price":24.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-30103-1-channel-turnout-decoder-suitable-for-all-solenoid-operated-drives-dcc-motorola-stationary-decoders-340.jpg?v=1789621101"},{"product_id":"decoderwerk-20402-4-channel-switching-decoder-for-switching-various-loads-using-4-power-mosfets-dcc-motorola","title":"Decoderwerk 20402 4-channel switching decoder for switching various loads using 4 power MOSFETs (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 4 outputs.\u003c\/li\u003e\n\u003cli\u003eThe power supply of the consumers is provided by the power source connected to the decoder.\u003c\/li\u003e\n\u003cli\u003eOperation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e9-18V AC voltage\u003c\/li\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nCost-effective plug-ing power supplies can be used. The decoder can also be supplied directly by the track voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e1A per output\u003c\/li\u003e\n\u003c\/ul\u003e\nEach output can be loaded with 1A and delivers 9-24V DC voltage. The decoder can be loaded with a maximum of 2A in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 10mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires less than 10mA in the idle state. The power requirement of the outputs depends on the connected article. We recommend a power supply with 2A.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong conclusion \u003c\/strong\u003eThe decoders have a charging control, so that the control panel does not mistakenly diagnose a short circuit when starting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eEach exit can be assigned an individual address. The addresses are freely selectable.\u003c\/li\u003e\n\u003cli\u003eSocial An address can be assigned several times. When the address is called, all outputs associated with this address are switched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory \u003c\/strong\u003eThe decoder automatically restores the last circuit when starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Always \u003c\/strong\u003eEach output is configured as continuous operation. The selected output is switched until it is deactivated by selecting it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching time individually. Switching pulses of 1 to 255 seconds are possible. And that in small steps of 1 second.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003ePhoenix Contact brand terminals for cables up to 1mm2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurntable \u003c\/strong\u003eThe control signal DCC or Märklin Motorola is connected via optocouplers and thus completely galvanically separated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u003c\/strong\u003e70x50mm, 20mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastening \u003c\/strong\u003e4 mounting holes of size M3. The inner diameter is 3.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692623655192,"sku":"IC-DWERK-20402","price":32.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-20402-4-channel-switching-decoder-for-various-loads-using-power-mosfets-dcc-motorola-stationary-decoders-192.jpg?v=1789621113"},{"product_id":"decoderwerk-20802-8-channel-switching-decoder-for-switching-various-loads-output-stage-with-8-power-mosfets-dcc-motorola","title":"Decoderwerk 20802 8-channel switching decoder for switching various loads Output stage with 8 power MOSFETs (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 8 outputs.\u003c\/li\u003e\n\u003cli\u003eThe power supply of the consumers is provided by the power source connected to the decoder.\u003c\/li\u003e\n\u003cli\u003eMotorola The operation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e9-18V AC voltage\u003c\/li\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nCost-effective plug-ing power supplies can be used. The decoder can also be supplied directly by the track voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e1A per output\u003c\/li\u003e\n\u003c\/ul\u003e\nEach output can be loaded with 1A and delivers 9-24V DC voltage. The decoder can be loaded with a maximum of 2A in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 10mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires less than 10mA in the idle state. The power requirement of the outputs depends on the connected article. We recommend a power supply with 2A.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong conclusion \u003c\/strong\u003eThe decoders have a charging control, so that the control panel does not mistakenly diagnose a short circuit when starting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eEach exit can be assigned an individual address. The addresses are freely selectable.\u003c\/li\u003e\n\u003cli\u003eSocial An address can be assigned several times. When the address is called, all outputs associated with this address are switched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory \u003c\/strong\u003eThe decoder automatically restores the last circuit when starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Always \u003c\/strong\u003eEach output is configured as continuous operation. The selected output is switched until it is deactivated by selecting it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching time individually. Switching pulses of 1 to 255 seconds are possible. And that in small steps of 1 second.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003ePhoenix Contact brand terminals for cables up to 1mm2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurntable \u003c\/strong\u003eThe control signal DCC or Märklin Motorola is connected via optocouplers and thus completely galvanically separated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u003c\/strong\u003e90x50mm, 25mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastening \u003c\/strong\u003e4 mounting holes of size M3. The inner diameter is 3.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe decoder has optical traces on the large plug-in terminal because of assembly correction. These are purely optical in nature and do not constitute a technical defect or cause for complaint.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692623589656,"sku":"IC-DWERK-20802","price":48.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-20802-8-channel-switching-decoder-for-various-loads-output-stage-with-power-mosfets-dcc-motorola-stationary-decoders-307.jpg?v=1789621124"},{"product_id":"decoderwerk-30205-c-track-turnout-decoder-for-installation-in-trix-and-marklin-c-track-with-lantern-output-dcc-motorola","title":"Decoderwerk 30205 C-Track turnout decoder for installation in Trix and Märklin C-Track, with lantern output (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 2 outputs.\u003c\/li\u003e\n\u003cli\u003eOperation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003eThe decoder is suitable for controlling Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eor Trix® C-way switches and the optional switch lantern.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatible\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecoder \u003c\/strong\u003eThe decoder is the ideal alternative for the built-in digital decoders 74460, 74461 and 74462.\u003c\/li\u003e\n\u003cli\u003eThe decoder can be connected directly to the electric switch drives 74490, 74491 and 74492.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMärklin\u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eC-Pleis \u003c\/strong\u003eThe decoder can be inserted and connected directly into the following switches.\n\u003cul\u003e\n\u003cli\u003eSwitch left 24611\u003c\/li\u003e\n\u003cli\u003eSwitch right 24612\u003c\/li\u003e\n\u003cli\u003eSlim switch left 24711\u003c\/li\u003e\n\u003cli\u003eSlim switch right 24712\u003c\/li\u003e\n\u003cli\u003eBow switch left 24771\u003c\/li\u003e\n\u003cli\u003eBow switch right 24772\u003c\/li\u003e\n\u003cli\u003eBow switch left 24671\u003c\/li\u003e\n\u003cli\u003eRight turn-a-right 24672\u003c\/li\u003e\n\u003cli\u003eDouble crossover switch 24624\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrix C-Train \u003c\/strong\u003eThe decoder can be inserted into the following switches and connected. The required connection cable is included.\n\u003cul\u003e\n\u003cli\u003eSwitch left 62611\u003c\/li\u003e\n\u003cli\u003eSwitch right 62612\u003c\/li\u003e\n\u003cli\u003eSlim switch left 62711\u003c\/li\u003e\n\u003cli\u003eSlim switch right 62712\u003c\/li\u003e\n\u003cli\u003eBow switch left 62671\u003c\/li\u003e\n\u003cli\u003eArcher right 62672\u003c\/li\u003e\n\u003cli\u003eSlim bow switch left 62771\u003c\/li\u003e\n\u003cli\u003eSlim bow switch right 62772\u003c\/li\u003e\n\u003cli\u003eDouble crossover switch 62624\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder is supplied directly by the track voltage. No separate power supply can be connected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e1A current\u003c\/li\u003e\n\u003c\/ul\u003e\nThe outputs can be loaded with 1A and provide 9-24V DC voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 5mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires under 5mA in the idle mode. The power demand of the output depends on the connected article.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard \u003c\/strong\u003eBy default, the output makes small steps with a switching pulse of 400ms.\u003c\/li\u003e\n\u003cli\u003eThe decoder supports the control of the switch lantern and automatically restores the last circuit of the switch lantern when the decoder starts.\u003c\/li\u003e\n\u003cli\u003eThe switch output can be inverted. For example, opposite-roging switches with the same address can be switched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching pulse individually. Switching pulses from 10 ms to 2,550 ms are possible. And that in small steps of 10ms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003eThe decoder has all connection cables for direct installation in a Märklin C-way sever.\u003cbr\u003eA suitable connection cable is included for the connection of Trix switches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting \u003c\/strong\u003eThe decoder can be easily attached to the inner bed of a C-way sader from Märklin or Trix.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692623884568,"sku":"IC-DWERK-30205","price":27.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-30205-c-track-turnout-decoder-for-installation-in-trix-and-maerklin-with-lantern-output-dcc-motorola-stationary-decoders-318.jpg?v=1789621136"},{"product_id":"decoderwerk-30302-c-track-turnout-decoder-for-the-slim-double-slip-switch-12-1-with-lantern-output-dcc-motorola","title":"Decoderwerk 30302 C-Track turnout decoder for the slim double-slip switch (12.1°) with lantern output (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 3 outputs.\u003c\/li\u003e\n\u003cli\u003eOperation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eThe decoder is suitable for controlling Märklin\u003cstrong\u003e\u003cspan\u003e®\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e\/TRIX\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eC-Pail slim double crossover switches and the optional switch lanterns.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatible\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecoder \u003c\/strong\u003eThe decoder is the ideal alternative for the built-in digital decoders 74467.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003eThe decoder can be connected directly to the electric switch drives 74490, 74491 and 74492.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMärklin C-Gleis \u003c\/strong\u003eThe decoder can be inserted and connected directly into the slim double crossover switch 24720.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRIX C-Gleis \u003c\/strong\u003eThe decoder can be inserted and connected directly into the slim double crossover 62720.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder is supplied directly by the track voltage. A separate power supply can be connected if required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e1A current\u003c\/li\u003e\n\u003c\/ul\u003e\nThe outputs can be loaded with 1A and provide 9-24V DC voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 5mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires under 5mA in the idle mode. The power demand of the output depends on the connected article.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard \u003c\/strong\u003eBy default, the output makes small steps with a switching pulse of 400ms.\u003c\/li\u003e\n\u003cli\u003eThe decoder supports the control of the switch lantern and automatically restores the last circuit of the switch lanterns when the decoder starts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching pulse individually. Switching pulses from 10 ms to 2,550 ms are possible. And that in small steps of 10ms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogical \u003c\/strong\u003eFor centrals that do not have their own switching symbol for the three-way switch, such as the Märklin Mobile Station, the switching logic automatically generates the necessary switching commands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003eThe decoder has all connection cables for direct installation in a Märklin C-way three-way switch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment \u003c\/strong\u003eThe decoder can be easily attached to the inner bed of a C-track three-way switch from Märklin or TRIX.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692623950104,"sku":"IC-DWERK-30302","price":45.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-30302-c-track-turnout-decoder-for-the-slim-double-slip-switch-12-1-with-lantern-output-dcc-motorola-stationary-decoders-628.jpg?v=1789621155"},{"product_id":"decoderwerk-30303-c-track-3-way-turnout-decoder-for-installation-in-trix-and-marklin-3-way-turnouts-with-lantern-output-dcc-motorola","title":"Decoderwerk 30303 C-Track 3-way turnout decoder for installation in Trix and Märklin 3-way turnouts, with lantern output (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 4 outputs.\u003c\/li\u003e\n\u003cli\u003eMotorola The operation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003eThe decoder is suitable for switches with double spool drives or decoupling tracks.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e9-18V AC voltage\u003c\/li\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nCost-effective plug-ing power supplies can be used. The decoder can also be supplied directly by the track voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003emaximum 2A per output\u003c\/li\u003e\n\u003c\/ul\u003e\nEach output can be individually charged with 2A and provides 9-24V DC voltage. The decoder can be loaded with a maximum of 2A in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 10mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires less than 10mA in the idle state. The power requirement of the outputs depends on the connected article. We recommend a power supply with 2A.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong conclusion \u003c\/strong\u003eThe decoders have a charging control, so that the control panel does not mistakenly diagnose a short circuit when starting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eEach exit can be assigned an individual address. The addresses are freely selectable.\u003c\/li\u003e\n\u003cli\u003eSocial An address can be assigned several times. When the address is called, all outputs associated with this address are switched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard \u003c\/strong\u003eBy default, each output generates a switching pulse of 400 ms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching pulse individually. Switching pulses from 10 ms to 2,550 ms are possible. And that in small steps of 10ms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eThe switching times can be configured individually for each output.\u003c\/li\u003e\n\u003cli\u003eIf the switching time is increased, the output remains activated as long as the button on the control panel is pressed. Thus, for example, decoupling tracks can be precisely controlled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Always \u003c\/strong\u003eAny output can be configured as continuous operation. The selected output is switched until it is deactivated by selecting it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003ePhoenix Contact brand terminals for cables up to 1mm2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurntable \u003c\/strong\u003eThe control signal DCC or Märklin Motorola is connected via optocouplers and thus completely galvanically separated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u003c\/strong\u003e70x50mm, 25mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastening \u003c\/strong\u003e4 mounting holes of size M3. The inner diameter is 3.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692623917336,"sku":"IC-DWERK-30303","price":45.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-30303-c-track-3-way-turnout-decoder-for-installation-in-trix-and-maerklin-turnouts-with-lantern-output-dcc-motorola-stationary-decoders-700.jpg?v=1789621184"},{"product_id":"decoderwerk-30403-4-channel-decoder-for-controlling-4-solenoid-operated-turnouts-dcc-motorola","title":"Decoderwerk 30403 4-channel decoder for controlling 4 solenoid-operated turnouts (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 4 outputs.\u003c\/li\u003e\n\u003cli\u003eMotorola The operation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003eThe decoder is suitable for switches with double spool drives or decoupling tracks.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e9-18V AC voltage\u003c\/li\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nCost-effective plug-ing power supplies can be used. The decoder can also be supplied directly by the track voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003emaximum 2A per output\u003c\/li\u003e\n\u003c\/ul\u003e\nEach output can be individually charged with 2A and provides 9-24V DC voltage. The decoder can be loaded with a maximum of 2A in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 10mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires less than 10mA in the idle state. The power requirement of the outputs depends on the connected article. We recommend a power supply with 2A.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong conclusion \u003c\/strong\u003eThe decoders have a charging control, so that the control panel does not mistakenly diagnose a short circuit when starting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eEach exit can be assigned an individual address. The addresses are freely selectable.\u003c\/li\u003e\n\u003cli\u003eSocial An address can be assigned several times. When the address is called, all outputs associated with this address are switched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard \u003c\/strong\u003eBy default, each output generates a switching pulse of 400 ms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching pulse individually. Switching pulses from 10 ms to 2,550 ms are possible. And that in small steps of 10ms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eThe switching times can be configured individually for each output.\u003c\/li\u003e\n\u003cli\u003eIf the switching time is increased, the output remains activated as long as the button on the control panel is pressed. Thus, for example, decoupling tracks can be precisely controlled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Always \u003c\/strong\u003eAny output can be configured as continuous operation. The selected output is switched until it is deactivated by selecting it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003ePhoenix Contact brand terminals for cables up to 1mm2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurntable \u003c\/strong\u003eThe control signal DCC or Märklin Motorola is connected via optocouplers and thus completely galvanically separated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u003c\/strong\u003e70x50mm, 25mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastening \u003c\/strong\u003e4 mounting holes of size M3. The inner diameter is 3.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692623982872,"sku":"IC-DWERK-30403","price":48.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-30403-4-channel-decoder-for-controlling-solenoid-operated-turnouts-dcc-motorola-stationary-decoders-617.jpg?v=1789621196"},{"product_id":"decoderwerk-30503-4-channel-decoder-for-controlling-4-solenoid-operated-turnouts-using-ac-power-dcc-motorola","title":"Decoderwerk 30503 4-channel decoder for controlling 4 solenoid-operated turnouts using AC power (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis decoder is equivalent to the 30403, but this decoder switches the consumer with AC VOLTAGE (AC) and generates it itself. NO AC transformer is required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 4 outputs.\u003c\/li\u003e\n\u003cli\u003eThe decoder has an AC generator and generates the alternating current itself\u003c\/li\u003e\n\u003cli\u003eThe decoder switches the consumers with AC (AC current) and thus counteracts demagnetization\u003c\/li\u003e\n\u003cli\u003eThe operation can be done with DCC or Märklin Märklin\u003cstrong\u003e\u003cspan\u003e®\u003c\/span\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eThe decoder is suitable for switches with double spool drives or decoupling tracks.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e9-18V AC voltage\u003c\/li\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nCost-effective plug-ing power supplies can be used. The decoder can also be supplied directly by the track voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003emaximum 2A per output\u003c\/li\u003e\n\u003c\/ul\u003e\nEach output can be individually charged with 2A and provides 9-24V DC voltage. The decoder can be loaded with a maximum of 2A in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 10mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires less than 10mA in the idle state. The power requirement of the outputs depends on the connected article. We recommend a power supply with 2A.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong conclusion \u003c\/strong\u003eThe decoders have a charging control, so that the control panel does not mistakenly diagnose a short circuit when starting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eEach exit can be assigned an individual address. The addresses are freely selectable.\u003c\/li\u003e\n\u003cli\u003eSocial An address can be assigned several times. When the address is called, all outputs associated with this address are switched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard \u003c\/strong\u003eBy default, each output generates a switching pulse of 400 ms.\u003c\/li\u003e\n\u003cli\u003eSmall steps You can adjust the switching pulse individually. Switching pulses from 10 ms to 2,550 ms are possible. And that in small steps of 10ms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eThe switching times can be configured individually for each output.\u003c\/li\u003e\n\u003cli\u003eIf the switching time is increased, the output remains activated as long as the button on the control panel is pressed. Thus, for example, decoupling tracks can be precisely controlled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Always \u003c\/strong\u003eAny output can be configured as continuous operation. The selected output is switched until it is deactivated by selecting it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003ePhoenix Contact brand terminals for cables up to 1mm2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurntable \u003c\/strong\u003eThe control signal DCC or Märklin Motorola is connected via optocouplers and thus completely galvanically separated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u003c\/strong\u003e110x50mm, 25mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastening \u003c\/strong\u003e4 mounting holes of size M3. The inner diameter is 3.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692624179480,"sku":"IC-DWERK-30503","price":56.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-30503-4-channel-decoder-for-controlling-solenoid-operated-turnouts-using-ac-power-dcc-motorola-stationary-decoders-177.jpg?v=1789621211"},{"product_id":"decoderwerk-30802-8-channel-decoder-for-controlling-8-solenoid-operated-turnouts-dcc-motorola","title":"Decoderwerk 30802 8-channel decoder for controlling 8 solenoid-operated turnouts (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 8 outputs.\u003c\/li\u003e\n\u003cli\u003eThe operation can be done with DCC or Märklin Märklin\u003cstrong\u003e\u003cspan\u003e®\u003c\/span\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eThe decoder is suitable for switches with double spool drives or decoupling tracks.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e9-18V AC voltage\u003c\/li\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nCost-effective plug-ing power supplies can be used. The decoder can also be supplied directly by the track voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003emaximum 2A per output\u003c\/li\u003e\n\u003c\/ul\u003e\nEach output can be individually charged with 2A and provides 9-24V DC voltage. The decoder can be loaded with a maximum of 2A in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 10mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires less than 10mA in the idle state. The power requirement of the outputs depends on the connected article. We recommend a power supply with 2A.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong conclusion \u003c\/strong\u003eThe decoders have a charging control, so that the control panel does not mistakenly diagnose a short circuit when starting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eEach exit can be assigned an individual address. The addresses are freely selectable.\u003c\/li\u003e\n\u003cli\u003eSocial An address can be assigned several times. When the address is called, all outputs associated with this address are switched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard \u003c\/strong\u003eBy default, each output generates a switching pulse of 400 ms.\u003c\/li\u003e\n\u003cli\u003eSmall steps You can adjust the switching pulse individually. Switching pulses from 10 ms to 2,550 ms are possible. And that in small steps of 10ms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eThe switching times can be configured individually for each output.\u003c\/li\u003e\n\u003cli\u003eIf the switching time is increased, the output remains activated as long as the button on the control panel is pressed. Thus, for example, decoupling tracks can be precisely controlled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Always \u003c\/strong\u003eAny output can be configured as continuous operation. The selected output is switched until it is deactivated by selecting it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003ePhoenix Contact brand terminals for cables up to 1mm2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurntable \u003c\/strong\u003eThe control signal DCC or Märklin Motorola is connected via optocouplers and thus completely galvanically separated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u003c\/strong\u003e110x50mm, 25mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastening \u003c\/strong\u003e4 mounting holes of size M3. The inner diameter is 3.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692624212248,"sku":"IC-DWERK-30802","price":64.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-30802-8-channel-decoder-for-controlling-solenoid-operated-turnouts-dcc-motorola-stationary-decoders-548.jpg?v=1789621226"},{"product_id":"decoderwerk-30902-8-channel-decoder-for-controlling-8-solenoid-operated-turnouts-using-ac-power-dcc-motorola","title":"Decoderwerk 30902 8-channel decoder for controlling 8 solenoid-operated turnouts using AC power (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis decoder is equivalent to the 30802, but this decoder switches the consumer with AC VOLTAGE (AC) and generates it itself. NO alternating current transformer is required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 8 outputs.\u003c\/li\u003e\n\u003cli\u003eThe decoder has an AC generator and generates the alternating current itself\u003c\/li\u003e\n\u003cli\u003eThe decoder switches the consumers with AC (AC current) and thus counteracts demagnetization\u003c\/li\u003e\n\u003cli\u003eThe operation can be done with DCC or Märklin Märklin\u003cstrong\u003e\u003cspan\u003e®\u003c\/span\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eThe decoder is suitable for switches with double spool drives or decoupling tracks.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e9-18V AC voltage\u003c\/li\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nCost-effective plug-ing power supplies can be used. The decoder can also be supplied directly by the track voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003emaximum 2A per output\u003c\/li\u003e\n\u003c\/ul\u003e\nEach output can be individually charged with 2A and provides 9-24V DC voltage. The decoder can be loaded with a maximum of 2A in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 10mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires less than 10mA in the idle state. The power requirement of the outputs depends on the connected article. We recommend a power supply with 2A.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong conclusion \u003c\/strong\u003eThe decoders have a charging control, so that the control panel does not mistakenly diagnose a short circuit when starting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eEach exit can be assigned an individual address. The addresses are freely selectable.\u003c\/li\u003e\n\u003cli\u003eSocial An address can be assigned several times. When the address is called, all outputs associated with this address are switched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard \u003c\/strong\u003eBy default, each output generates a switching pulse of 400 ms.\u003c\/li\u003e\n\u003cli\u003eSmall steps You can adjust the switching pulse individually. Switching pulses from 10 ms to 2,550 ms are possible. And that in small steps of 10ms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eThe switching times can be configured individually for each output.\u003c\/li\u003e\n\u003cli\u003eIf the switching time is increased, the output remains activated as long as the button on the control panel is pressed. Thus, for example, decoupling tracks can be precisely controlled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Always \u003c\/strong\u003eAny output can be configured as continuous operation. The selected output is switched until it is deactivated by selecting it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003ePhoenix Contact brand terminals for cables up to 1mm2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurntable \u003c\/strong\u003eThe control signal DCC or Märklin Motorola is connected via optocouplers and thus completely galvanically separated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u003c\/strong\u003e110x50mm, 25mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastening \u003c\/strong\u003e4 mounting holes of size M3. The inner diameter is 3.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692624277784,"sku":"IC-DWERK-30902","price":72.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-30902-8-channel-decoder-for-controlling-solenoid-operated-turnouts-using-ac-power-dcc-motorola-stationary-decoders-591.jpg?v=1789621241"},{"product_id":"decoderwerk-40101-turnout-decoder-for-controlling-1-motor-drive-and-kato®-turnouts-dcc-motorola","title":"Decoderwerk 40101 Turnout decoder for controlling 1 motor drive and KATO® turnouts (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 1 output.\u003c\/li\u003e\n\u003cli\u003eOperation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003eThe decoder is suitable for switches with motor drive or for switches with polarized direct current drives.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatible\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLGB\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eswitch drives\u003c\/li\u003e\n\u003cli\u003eKATO\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003ealso switches suspenders\u003c\/li\u003e\n\u003cli\u003eTomix\u003c\/li\u003e\n\u003cli\u003eRokuhan\u003c\/li\u003e\n\u003cli\u003eConrad\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003efor all engines and drives with 2 connection lines\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e9-18V AC voltage\u003c\/li\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nCost-effective plug-ing power supplies can be used. The decoder can also be supplied directly by the track voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e2A per output\u003c\/li\u003e\n\u003c\/ul\u003e\nEach output can be loaded with 2A and provides 9-24V DC voltage. The decoder can be loaded with a maximum of 2A in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 10mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires less than 10mA in the idle state. The power requirement of the outputs depends on the connected article. We recommend a power supply with 2A.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong conclusion \u003c\/strong\u003eThe decoders have a charging control, so that the control panel does not mistakenly diagnose a short circuit when starting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eEach exit can be assigned an individual address. The addresses are freely selectable.\u003c\/li\u003e\n\u003cli\u003eSocial An address can be assigned several times. When the address is called, all outputs associated with this address are switched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard \u003c\/strong\u003eBy default, each output makes small steps with a switching momentum of 4 seconds.\u003c\/li\u003e\n\u003cli\u003eIndividual The switching times can be configured individually for each output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching pulse individually. Switching pulses of 100 ms to 25 seconds are possible. And that in small steps of 100ms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Always \u003c\/strong\u003eAny output can be configured as continuous operation. The selected connection of an output is supplied with power until the other connection is activated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003ePre-wired with 4 connection cables for direct connection\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eTurntable The control signal DCC or Märklin Motorola is connected via optocouplers and thus completely galvanically separated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u003c\/strong\u003e12x8mm, 4mm high\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692624245016,"sku":"IC-DWERK-40101","price":32.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-40101-turnout-decoder-for-controlling-1-motor-drive-and-kato-r-turnouts-dcc-motorola-stationary-decoders-684.jpg?v=1789621257"},{"product_id":"decoderwerk-40104-1-channel-motor-decoder-for-controlling-motors-and-motorized-turnout-drives-dcc-motorola","title":"Decoderwerk 40104 1-channel motor decoder for controlling motors and motorized turnout drives (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 1 output.\u003c\/li\u003e\n\u003cli\u003eOperation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003eThe decoder is suitable for switches with motor drive or for switches with polarized direct current drives.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatible\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLGB\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eswitch drives\u003c\/li\u003e\n\u003cli\u003eKATO\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003ealso switches suspenders\u003c\/li\u003e\n\u003cli\u003eTomix\u003c\/li\u003e\n\u003cli\u003eRokuhan\u003c\/li\u003e\n\u003cli\u003eConrad\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003efor all engines and drives with 2 connection lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e9-18V AC voltage\u003c\/li\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nCost-effective plug-ing power supplies can be used. The decoder can also be supplied directly by the track voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e2A per output\u003c\/li\u003e\n\u003c\/ul\u003e\nEach output can be loaded with 2A and provides 9-24V DC voltage. The decoder can be loaded with a maximum of 2A in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 10mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires less than 10mA in the idle state. The power requirement of the outputs depends on the connected article. We recommend a power supply with 2A.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong conclusion \u003c\/strong\u003eThe decoders have a charging control, so that the control panel does not mistakenly diagnose a short circuit when starting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eEach exit can be assigned an individual address. The addresses are freely selectable.\u003c\/li\u003e\n\u003cli\u003eSocial An address can be assigned several times. When the address is called, all outputs associated with this address are switched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard \u003c\/strong\u003eBy default, each output makes small steps with a switching momentum of 4 seconds.\u003c\/li\u003e\n\u003cli\u003eIndividual The switching times can be configured individually for each output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching pulse individually. Switching pulses of 100 ms to 25 seconds are possible. And that in small steps of 100ms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Always \u003c\/strong\u003eAny output can be configured as continuous operation. The selected connection of an output is supplied with power until the other connection is activated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003ePhoenix Contact brand terminals for cables up to 1mm2.\u003c\/li\u003e\n\u003cli\u003eTurntable The control signal DCC or Märklin Motorola is connected via optocouplers and thus completely galvanically separated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u003c\/strong\u003e70x50mm, 20mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastening \u003c\/strong\u003e4 mounting holes of size M3. The inner diameter is 3.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692624671000,"sku":"IC-DWERK-40104","price":24.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-40104-1-channel-motor-decoder-for-controlling-motors-and-motorized-turnout-drives-dcc-motorola-stationary-decoders-471.jpg?v=1789621263"},{"product_id":"decoderwerk-40403-4-channel-motor-decoder-for-controlling-4-motors-and-motorized-turnout-drives-dcc-motorola","title":"Decoderwerk 40403 4-channel motor decoder for controlling 4 motors and motorized turnout drives (DCC + Motorola)","description":"\u003ch2 class=\"product-addition-headline\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"product-addition-content\" itemprop=\"description\"\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe decoder has 4 outputs.\u003c\/li\u003e\n\u003cli\u003eOperation can be done with DCC or Märklin\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eMotorola.\u003c\/li\u003e\n\u003cli\u003eThe decoder is suitable for switches with motor drive or for switches with polarized direct current drives.\u003c\/li\u003e\n\u003cli\u003e100% quality check of all decoders\u003cbr\u003eDevelopment and production in Germany\u003cbr\u003eWe only use components of well-known brand manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatible\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLGB\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003eswitch drives\u003c\/li\u003e\n\u003cli\u003eKATO\u003cstrong\u003e\u003cspan\u003e® \u003c\/span\u003e\u003c\/strong\u003ealso switches suspenders\u003c\/li\u003e\n\u003cli\u003eTomix\u003c\/li\u003e\n\u003cli\u003eRokuhan\u003c\/li\u003e\n\u003cli\u003eConrad\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003efor all engines and drives with 2 connection lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoltage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild up\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e9-18V AC voltage\u003c\/li\u003e\n\u003cli\u003e9-24V track voltage\u003c\/li\u003e\n\u003c\/ul\u003e\nCost-effective plug-ing power supplies can be used. The decoder can also be supplied directly by the track voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e9-24V DC voltage\u003c\/li\u003e\n\u003cli\u003e2A per output\u003c\/li\u003e\n\u003c\/ul\u003e\nEach output can be loaded with 2A and provides 9-24V DC voltage. The decoder can be loaded with a maximum of 2A in total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eQuiet current below 10mA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe decoder itself requires less than 10mA in the idle state. The power requirement of the outputs depends on the connected article. We recommend a power supply with 2A.\u003c\/li\u003e\n\u003cli\u003eThe decoders are protected against short circuit with a self-resetting fuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong conclusion \u003c\/strong\u003eThe decoders have a charging control, so that the control panel does not mistakenly diagnose a short circuit when starting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArtificial intelligence\u003c\/strong\u003e, at least a little. The decoder has an automatic learning mode for addressing. You only have to press a button and call up the desired addresses at your headquarters. Done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual \u003c\/strong\u003eEach exit can be assigned an individual address. The addresses are freely selectable.\u003c\/li\u003e\n\u003cli\u003eSocial An address can be assigned several times. When the address is called, all outputs associated with this address are switched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control \u003c\/strong\u003eThe decoder can be configured directly at its place of use from a DCC control panel by means of programming-on-main. All CV's can be updated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection \u003c\/strong\u003eThe decoder can be configured on a DCC programming track. All CV's can be read and written via direct mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard \u003c\/strong\u003eBy default, each output makes small steps with a switching momentum of 4 seconds.\u003c\/li\u003e\n\u003cli\u003eIndividual The switching times can be configured individually for each output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall steps \u003c\/strong\u003eYou can adjust the switching pulse individually. Switching pulses of 100 ms to 25 seconds are possible. And that in small steps of 100ms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Always \u003c\/strong\u003eAny output can be configured as continuous operation. The selected connection of an output is supplied with power until the other connection is activated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections \u003c\/strong\u003ePhoenix Contact brand terminals for cables up to 1mm2.\u003c\/li\u003e\n\u003cli\u003eTurntable The control signal DCC or Märklin Motorola is connected via optocouplers and thus completely galvanically separated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \u003c\/strong\u003e70x50mm, 20mm high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastening \u003c\/strong\u003e4 mounting holes of size M3. The inner diameter is 3.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003cp\u003eDecoderwerk user guides for most products (with english text) can be found \u003ca href=\"https:\/\/decoderwerk.com\/i\/downloads\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Decoderwerk","offers":[{"title":"Default Title","offer_id":52692624605464,"sku":"IC-DWERK-40403","price":48.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/7023\/4136\/files\/decoderwerk-40403-4-channel-motor-decoder-for-controlling-motors-and-motorized-turnout-drives-dcc-motorola-stationary-decoders-530.jpg?v=1789621275"}],"url":"https:\/\/ictrainsandhobbies.com\/collections\/dcc-stationary-decoders.oembed?page=2","provider":"InterCity Trains and Hobbies","version":"1.0","type":"link"}